The types of tent that are commonly found:

I) Canadian

They are traditional tents and marquees oldest model, have the classic gabled roof and are made with highly durable and resistant materials. Even though they are made they are already ceasing to be used, replaced by igloos and structural advantages like more technical materials of lower weight and greater interior space. It is the best 10 person tents for family

  • Pros: durable materials that support mistreatment, robust and resilient parts.
  • Disadvantages: heavy, materials are forming mold quickly and should be thoroughly dry and clean, poor maintenance of internal heat, worse performance against the high winds.

II) Structural

They are tents designed for stays of several days, for many people (e.g., there are models for ten people with two bedrooms and a dining room).

  • Advantages: comfort, because they have good internal height, almost vertical walls, and therefore greater interior space. Solid structure, parents fiberglass and steel are used. Technical and quality materials are used, which make them have excellent impermeability characteristics, conservation of heat and ventilation. Designs and shapes that offer good resistance to winds and heavy rain.
  • Disadvantages: the tents are more massive, assembly, disassembly and cleaning, and people take longer than other types of shelters.


III) Igloos

Are today the most used type of housing, replacing traditional Canadian in the choice of most campers. This success is the result of new synthetic materials with improved characteristics for weathering and dome-shaped with improved aerodynamics offers less resistance to the wind while its light weight makes it easily transportable. Also, the igloo-shaped dome can also be shaped tunnel.

There are two kinds of types igloo tents commonly called: igloos and igloo three stations four locations.

These names are due to the number of times of the year for which these tents are ready, going more into detail

Igloos 3 locations:

Sometimes are also called mid-mountain or trekking and are conceived and designed for times of spring, summer and autumn models. They are the type most widely used, and their materials have capacities of impermeability and adequate rainfall and average temperatures breathability (typically resist up to 5000 mm water column on the floor and between 1000 and 3000 mm water column on your wall). They are easy to assemble with little weight for lightweight portability.

It ‘s okay to have several openings allowing them to proper ventilation and almost always have a very useful to protect backpacks or before entry into the tent changed apse.

The rods in these models are usually fiberglass (read the types of bars, breakages preventions, arrangements section to learn more about rods)

The disadvantages of these models have to take into account its elements, despite its excellent performance, are more susceptible to breakage than for example the Canadians. To prevent tearing of the fabric is worth investing a little more on models that have the ripstop (ripstop) treatment and see that the thickness of the rods is adequate to the size of the tent.

It is always good to carry a plastic or canvas to place additional under the floor and protect it from moisture, stones, friction and so extend the life.

Igloos 4 seasons:

They are often called a high mountain, and it is precise because they have intended use. Its materials have a high degree of impermeability (with a minimum of 3000 mm water column on its roof), are designed for use in strong winds, snow, and temperatures several degrees below zero. They have fewer ventilation models, and three stations are duralumin rods for greater wind resistance. In short, they are not comfortable or suitable for recreational camping patterns.

Types of fabrics used in tents


  • Advantages: Good breathability (transpiration) / No condenses
  • Disadvantages: It’s heavy (180 to 300 grams per square meter) / roots more easily than other fabrics (when it is saved even with low humidity)
  • Part of the tent where it is used: inner wall tent (in this case is essential to use the rainfly to be responsible for waterproofing)


  • Advantages: Lightweight fabric (60 to 80 grams per square meter) / Good resistance to sunlight, abrasion and tear / not absorb water
  • Disadvantages: Little elastic
  • Part of the tent where it is used: In the rainfly with a PU (polyurethane) coating gives waterproofing / On the floor coated / In the inner wall of the tent

Nylon Polyamide

  • Advantages: Lightweight fabric (60 to 80 grams per square meter) / Good resistance to stretching and abrasions / is elastic and will not rot
  • Disadvantages: Low resistance to UV rays
  • Part of the tent where it is used: inner wall tent (in this case is essential to use the rainfly that protects from sunlight)
  • Ripstop variants: the above fabrics may have ripstop called aggregate, which is a network of threads ripstop capacity increases. The nylon fabric is commonly found with this addition but may be other fabrics.


They apply to clothes on the floor and in the rainfly to enhance the capabilities of these materials generally three kinds of sheets are used:

  • Induced Silicone coating: durable waterproof achieved with little-added weight. It has good elasticity at low temperatures and excellent protection from UV rays.
  • Induced Polyurethane coating: Good flexibility and impermeability even at low temperatures. With UV protection.
  • Induced layer PVC: it is much heavier than the other coatings (doing the heaviest, therefore, carp) and may crack in the cold (it is the cheapest liner 3 and is used in the tents of lower quality)

For more tips, visit

Leave a Comment